Today’s preparation means a cooler, more comfortable tomorrow in Wilmington, North Carolina. We’re talking about AC repair, and we’ve got a few things in mind to help you get ready for summertime.
Ready to beat the summer heat? Continue reading to learn more.
How To Prep Your AC Unit for Summer
Clean and check the filters
Once you’ve successfully disconnected the power to the condenser, take a look at the filters. These filters not only act as the first line of defense against indoor pollutants, but they also directly impact the efficiency and longevity of your AC unit.
If a filter appears salvageable, use a vacuum hose to remove as much dust and debris as you can. Then, take the filters to the sink and gently wash them using one part water and one part white vinegar before rinsing with clean water and laying them in the sun to dry.
If there is visible damage to the filter, then it will need to be replaced. This process is fairly simple: Just follow the instructions provided by the manufacturer.
Clean the coils and fan
Most AC units are located outside. Often, these units are covered during the winter, in which case very little maintenance will be required. If not, however, the open grates on the sides of the unit will allow dust and debris to build up on the fan as well as the condenser coils.
Using a soft brush vacuum attachment, gently clean the coils and fan taking special care not to bend anything out of place. If you see any debris at the base of the condenser, be sure to remove it and check that the drain (if applicable) is clear of any obstruction. If there is grime on the blades of the fan, simply wipe them down using a damp cloth.
Inspect the insulation
Coolant lines run from the air handler to the condenser and should be covered with a layer of insulation to combat against extreme temperature changes. Typically a foam coolant line insulation sleeve and insulation tape are used to protect these lines.
Take a look at these lines and replace any insulation that appears damaged or missing as soon as possible to protect the lines from unwanted exposure.
Give the AC a test run
The most important step to ensure your AC unit is ready for summer is to power it up and make sure everything works as expected.
Once the AC unit dries off and the air filters have been replaced, switch the power breaker back on and switch the thermostat to cool to ensure there are no surprises.
Schedule an HVAC Inspection in Wilmington, NC
Of course, not everyone is the DIY type. Remove the guesswork from the equation by scheduling a 15-point HVAC inspection with Wilmington Air. We provide top rated HVAC services in Wilmington, NC. Schedule your service appointment today.
When trouble arises with your HVAC unit, it’s typically best to call on the professionals for help. But there are a few common problems you may be able to address yourself.
HVAC problems can be put into one of three categories: no air, weak air, or inconsistent air. Below are some troubleshooting actions for some of the more common HVAC issues to help you diagnose or even fix problems before calling the team at Wilmington Air for help.
The 3 Most Common HVAC Issues
If your HVAC system won’t turn on, check the power source. Hopefully it’s as simple as the cord becoming unplugged. Inspect it for damage caused by moving furniture or pests. And if the unit has a built-in circuit breaker, reset it and try to power the system on again.
If you still don’t have any luck, plug something else into the same outlet and turn that device on to determine if the problem is the outlet or your HVAC system.
One common problem with HVAC units is a weak flow of hot or cold air. A dirty and clogged up filter is often to blame, so the first thing you should do is check or change the air filters in your house. It’s recommended that these filters be changed every 60-90 days.
If a fresh filter doesn’t do the trick, the problem may be present in the motor, fan blade, or compressor and may require a professional set of eyes.
Sometimes a faulty HVAC unit will heat or cool the house inconsistent with the desired settings. This can often be an issue with the thermostat. Thermostats run on batteries, so first try checking the battery connecting points for dust or corrosion before then replacing the battery altogether.
Let the Professionals Step In
If you’ve exhausted your troubleshooting options and the problems with your HVAC unit persist, it may be time to call in some professional help. At Wilmington Air, we offer the HVAC repair and maintenance expertise that can go above and beyond simple troubleshooting to restore your system to its proper working order.
Schedule your service appointment today and let our team of expert technicians help you find some comfort in your home again.